Additional remediation of new P2P applications in NAC

[Read, Simon]

Hi All,

Anybody know if it's possible to add additional P2P applications to NAC. We have had success in our PoC with Limewire and utorrent, but not with Vuze and Mediaget.


Any suggestions would be appreciated.

Simon Read
Network Specialist

Nashua Communications (Pty) Ltd.
Unit 12 Growthpoint Business Park,
No 2 Tonnetti Street, Midrand, 1685
Cell: [phone]
DDI:[phone]
Fax: +27 (0)10 001 2500
***@nashua-communications.com<mailto:***@nashua-communications.com>
www.nashua-communications.com<http://www.nashua-communications.com/>

[Nashua Communications EMAIL Logo2.gif]

From: John Kaftan [mailto:***@utica.edu]
Sent: 22 April 2014 05:47 PM
To: Enterasys Customer Mailing List
Subject: Re: [enterasys] N7: Netflow Interface names?


Thank you I will try that.
On Apr 22, 2014 11:18 AM, <***@fhsu.edu><mailto:***@fhsu.edu>> wrote:
I've done this by adding the following string:

Alias: $alarmSubcomponent

Derek Johnson | Data Communications Coordinator
FORT HAYS STATE UNIVERSITY
415 Lyman Dr. TH 101, Hays, KS 67601
(785) 628 - 5688<tel:%28785%29%20628%20-%205688> | ***@fhsu.edu<mailto:***@fhsu.edu>





From: John Kaftan <***@utica.edu><mailto:***@utica.edu>>
To: "Enterasys Customer Mailing List" <***@listserv.unc.edu><mailto:***@listserv.unc.edu>>
Date: 04/22/2014 08:24 AM
Subject: Re: [enterasys] N7: Netflow Interface names?
________________________________



I am looking for a way to include interface names with alerts. When I get an alert from an interface going down on an S4 I would like the port alias included so I know what it is. So far I have added the $alarmSubcomponent to the body of my alert but that hasn't worked. Does anyone have this working?

Thanks

Device: $deviceIp
Severity: $severity
Message: $message
Other Info: $alarmSubcomponent


On Tue, Apr 22, 2014 at 4:27 AM, Matthias Nees <***@bell.de><mailto:***@bell.de>> wrote:
Hi,

in recent N7 Firmware you can set this with:

set netflow export-data enable mac or vlan


Regards,
Matthias Nees

-----Ursprüngliche Nachricht-----
Von: Stefan Hofem [mailto:***@ludwigshafen.de<mailto:***@ludwigshafen.de>]
Gesendet: Dienstag, 22. April 2014 09:32
An: Enterasys Customer Mailing List
Betreff: [enterasys] N7: Netflow Interface names?

Hi,

is there an option similar to the Cisco "ip flow-export interface-names" command to add the interface-names to the flows?

Netflow-exporter is an old N7 (07.41.03)?

Regards
Stefan Hofem
---
To unsubscribe from enterasys, send email to ***@unc.edu<mailto:***@unc.edu> with the body: unsubscribe enterasys ***@bell.de<mailto:***@bell.de>



--
John Kaftan
IT Infrastructure Manager
Utica College

* --To unsubscribe from enterasys, send email to ***@unc.edu<mailto:***@unc.edu> with the body: unsubscribe enterasys ***@fhsu.edu<mailto:***@fhsu.edu>

* --To unsubscribe from enterasys, send email to ***@unc.edu<mailto:***@unc.edu> with the body: unsubscribe enterasys ***@utica.edu<mailto:***@utica.edu>

* --To unsubscribe from enterasys, send email to ***@unc.edu<mailto:***@unc.edu> with the body: unsubscribe enterasys ***@nashua-communications.com<mailto:***@nashua-communications.com>


Disclaimer

The information contained in this communication from the sender is confidential. It is intended solely for use by the recipient and others authorized to receive it. If you are not the recipient, you are hereby notified that any disclosure, copying, distribution or taking action in relation of the contents of this information is strictly prohibited and may be unlawful.

This email has been scanned for viruses and malware, and automatically archived by Mimecast SA (Pty) Ltd, an innovator in Software as a Service (SaaS) for business. Mimecast Unified Email Management (UEM) offers email continuity, security, archiving and compliance with all current legislation. To find out more, visit http://www.mimecast.co.za/uem.
---
To unsubscribe from enterasys, send email to ***@unc.edu with the body: unsubscribe enterasys gneu-***@gmane.org