AW: AW: Re:Switch B3 - VLANs

[Kannengießer, Peter]

Your output seem that you've find a bug...

You can't have 2 vlans untagged on one port (ge.1.7) in one switch...

Normaly the switch schouldn't accept such a configuration.



Peter
-----Ursprüngliche Nachricht-----
Von: ***@listserv.unc.edu [mailto:***@listserv.unc.edu] Im Auftrag von Rogerio
Gesendet: Donnerstag, 11. September 2014 16:14
An: Enterasys Customer Mailing List
Betreff: [enterasys] AW: Re:Switch B3 - VLANs

Hi Dennis,

I send the wrong output for switch 1, the below is the corret, but don't work as expected. What is wrong?



Switch_1(su)->show vlan

VLAN: 1 NAME: DEFAULT VLAN
VLAN Type: Default
Egress Ports
ge.1.1, ge.1.3-10, ge.1.13-15, ge.1.19-26, ge.1.28, ge.1.30, ge.1.32-34, ge.1.36-39, ge.1.45-48 Forbidden Egress Ports None.
Untagged ports
ge.1.1, ge.1.3-10, ge.1.13-15, ge.1.19-26, ge.1.28, ge.1.30, ge.1.32-34, ge.1.36-39, ge.1.45-47

VLAN: 101 NAME:
VLAN Type: Permanent
Egress Ports
ge.1.7, ge.1.10, ge.1.48
Forbidden Egress Ports
None.
Untagged ports
ge.1.7, ge.1.10

VLAN: 102 NAME:
VLAN Type: Permanent
Egress Ports
ge.1.7, ge.1.48
Forbidden Egress Ports
None.
Untagged ports
ge.1.7

Thanks,
Rogerio
---

---
To unsubscribe from enterasys, send email to ***@unc.edu with the body: unsubscribe enter