Matrix X4, XM8-01 Module

[Beatrix Wirth]

Hello Guys,



I have two X4 series (CM firmware version 02.00.1; uptime 497 Day.)In both
are one XM8-01 Modules.

In both X4-Switch this IOM-Modules crash at the same Time!



After reboot the System Chassie, the XM8-01 start initialize…..but donŽt
come up.

I must plug out the Module, because the whole Switch donŽt work.

I test the Module in slot 3 with same result: start initialize…. and that’s
it.



Anyone have an idea whatŽs happened.





Mit freundlichen Grüßen



Beatrix Wirth

Technik



Klaus Wolff

Business Solutions



Rheinstrasse 28

56424 Mogendorf



Telefon: 02623-9637-0

Telefax: 02623-9637-18




---
To unsubscribe from enterasys, send email to ***@unc.edu with the body: unsubscribe enterasys gneu-***@gmane.org

[Erik Auerswald]

Hi,

see the Enterasys Networks Knowledgebase article #14527, "Matrix X f/w 2.x
IOMs crashing at 497 days of uptime"

https://cp-enterasys.kb.net/article.aspx?article=14527&p=1

Seems you need to upgrade to FW version 2.0.2.1 or higher.

Best regards,
Erik
--
Dipl.-Inform. Erik Auerswald http://www.fg-networking.de/
***@fg-networking.de T:[phone] M:[phone]

Gesellschaft für Fundamental Generic Networking mbH
Geschäftsführung: Volker Bauer, Jörg Mayer
Gerichtsstand: Amtsgericht Kaiserslautern - HRB: 3630

Post by Beatrix Wirth
Hello Guys,
I have two X4 series (CM firmware version 02.00.1; uptime 497 Day.)In both
are one XM8-01 Modules.
In both X4-Switch this IOM-Modules crash at the same Time!
After reboot the System Chassie, the XM8-01 start initialize…..but don´t
come up.
I must plug out the Module, because the whole Switch don´t work.
I test the Module in slot 3 with same result: start initialize…. and that’s
it.
Anyone have an idea what´s happened.
Mit freundlichen Grüßen
Beatrix Wirth
Technik
Klaus Wolff
Business Solutions
Rheinstrasse 28
56424 Mogendorf
Telefon: 02623-9637-0
Telefax: 02623-9637-18

---
To unsubscribe from enterasys, send email to ***@unc.edu with the body: unsubscribe enterasys gneu-***@gmane.org

[William Olive]

I suggest you call the GTAC.
I also had the "crash at 497 days" problem with my X8s, but they would restart after the crash.


Billo
Data Communications Co-Ordinator
Information Technology & Telecommunications
ph 0249 213804 fax [phone]
***@hnehealth.nsw.gov.au



-----Original Message-----
From: Erik Auerswald [mailto:***@fg-networking.de]
Sent: Tuesday, 2 July 2013 12:27 AM
To: Enterasys Customer Mailing List
Subject: Re: [enterasys] Matrix X4, XM8-01 Module

Hi,

see the Enterasys Networks Knowledgebase article #14527, "Matrix X f/w 2.x IOMs crashing at 497 days of uptime"

https://cp-enterasys.kb.net/article.aspx?article=14527&p=1

Seems you need to upgrade to FW version 2.0.2.1 or higher.

Best regards,
Erik
--
Dipl.-Inform. Erik Auerswald http://www.fg-networking.de/
***@fg-networking.de T:[phone] M:[phone]

Gesellschaft für Fundamental Generic Networking mbH
Geschäftsführung: Volker Bauer, Jörg Mayer
Gerichtsstand: Amtsgericht Kaiserslautern - HRB: 3630

Post by Beatrix Wirth
Hello Guys,
I have two X4 series (CM firmware version 02.00.1; uptime 497 Day.)In
both are one XM8-01 Modules.
In both X4-Switch this IOM-Modules crash at the same Time!
After reboot the System Chassie, the XM8-01 start initialize…..but
don´t come up.
I must plug out the Module, because the whole Switch don´t work.
I test the Module in slot 3 with same result: start initialize…. and
that’s it.
Anyone have an idea what´s happened.
Mit freundlichen Grüßen
Beatrix Wirth
Technik
Klaus Wolff
Business Solutions
Rheinstrasse 28
56424 Mogendorf
Telefon: 02623-9637-0
Telefax: 02623-9637-18

---
To unsubscribe from enterasys, send email to ***@unc.edu with the body: unsubscribe enterasys ***@hnehealth.nsw.gov.au

---
To unsubscribe from enterasys, send email to ***@unc.edu with the body: unsubscribe enterasys gneu-***@gmane.org