Netsight SNMP error affecting MIB -SNMP load failure ‘Failure, “SNMP native library could not be loaded’ SNMP will not function correctly!”

[Mamabolo, Pheko]

Hello Everybuddy,

My Netsight Suite for the past 3 days gives me an error SNMP load failure ‘Failure, “SNMP native library could not be loaded’ SNMP will not function correctly!”
…so I can’t view statistics, configuration and capabilities on Netsight Console this is after it has worked for the past 6 years with no such an error as this?

The first installed it 5 years ago and used on Microsoft XP and now for the past 1 year have been using on Windows 7,
My version is Netsight Suite ver. 4.0.0.93 with Java Version 7.65.

I have downgraded to older versions and did the same with the Java numerous times…

I am able to receive alerts, information on my switches and AP’s but am not able to see active MIB
e.g. Link Operation, Last Change, Bandwidth, MAC Address, Counters on any of my devices at a go anymore not even when using MIB Tools or FlexVIEW .

All it contacts is the IP Address and Display Name.






OR NsJni:66 - Unable to load: C:\Users\netmanage\Application Data\NetSight\System\.bin\libeay32.dll
15:22:01,272 ERROR NsJni:66 - Unable to load: C:\Users\netmanage\Application Data\NetSight\System\.bin\nssnmp.dll
15:22:01,272 ERROR SnmpJNI:427 -
15:22:01,272 ERROR SnmpJNI:428 - *****************************************************
15:22:01,272 ERROR SnmpJNI:429 - ** Failure, SNMP native library could not be loaded.
15:22:01,272 ERROR SnmpJNI:430 - ** SNMP will not function correctly!
15:22:01,272 ERROR SnmpJNI:431 - *****************************************************
15:22:01,272 ERROR SnmpJNI:432 -
15:22:01,410 ERROR ClientContext:249 - The native SNMP layer failed to load.

I attempted numerous options and can‘t get to fix it.

I have confirmed Windows Firewall is not active in Domain Profile.
I checked all services including nssnmp.dll all seems intact I am not using snmp ver3 so configuring snmptrapd.conf is not the problem restarted services and the server no change, re-installed no change as you can see I do contact my devices…

Any ideas?

With best regards,
Pheko Mamabolo

CIT–R AAE Network Analyst
Siemens (Proprietary) Limited
RC-ZA IT SD&CM N
300 Janadel Avenue
Midrand 1686, South Africa
Tel: [phone]
Mobile: [phone]
mailto:***@siemens.com








---
To unsubscribe from enterasys, send email to ***@unc.edu with the body: unsubscribe enterasys gneu-***@gmane.org

[Laramie Combs]

I have seen this issue in the past if you try to use 64 bit java on any
Netsight version less than 5.x.

Try installing 32 bit java and see if it fixes the issue.

-LC

Post by Mamabolo, Pheko
Hello Everybuddy,
My Netsight Suite for the past 3 days gives me an error SNMP load failure
‘Failure, “SNMP native library could not be loaded’ SNMP will not function
correctly!”

so I can’t view statistics, configuration and capabilities on Netsight
Console this is after it has worked for the past 6 years with no such an
error as this?
The first installed it 5 years ago and used on Microsoft XP and now for
the past 1 year have been using on Windows 7,
My version is Netsight Suite ver. 4.0.0.93 with Java Version 7.65.
I have downgraded to older versions and did the same with the Java
numerous times

I am able to receive alerts, information on my switches and AP’s but am
not able to see active MIB
e.g. Link Operation, Last Change, Bandwidth, MAC Address, Counters on any
of my devices at a go anymore not even when using MIB Tools or FlexVIEW .
All it contacts is the IP Address and Display Name.
OR NsJni:66 - Unable to load: C:\Users\netmanage\Application
Data\NetSight\System\.bin\libeay32.dll
C:\Users\netmanage\Application Data\NetSight\System\.bin\nssnmp.dll
15:22:01,272 ERROR SnmpJNI:427 -
15:22:01,272 ERROR SnmpJNI:428 -
*****************************************************
15:22:01,272 ERROR SnmpJNI:429 - ** Failure, SNMP native library could
not be loaded.
15:22:01,272 ERROR SnmpJNI:430 - ** SNMP will not function correctly!
15:22:01,272 ERROR SnmpJNI:431 -
*****************************************************
15:22:01,272 ERROR SnmpJNI:432 -
15:22:01,410 ERROR ClientContext:249 - The native SNMP layer failed to
load.
I attempted numerous options and can‘t get to fix it.
I have confirmed Windows Firewall is not active in Domain Profile.
I checked all services including nssnmp.dll all seems intact I am not
using snmp ver3 so configuring snmptrapd.conf is not the problem restarted
services and the server no change, re-installed no change as you can see I
do contact my devices

Any ideas?
With best regards,
Pheko Mamabolo
CIT–R AAE Network Analyst
Siemens (Proprietary) Limited
RC-ZA IT SD&CM N
300 Janadel Avenue
Midrand 1686, South Africa
Tel: [phone]
Mobile: [phone]

[Mamabolo, Pheko]

I also have tried a 32 bit although while on it I then had security complications.

Thanks for a shot for a solution-LC



Sent from Samsung Mobile



-------- Original message --------
From: Laramie Combs <***@appstate.edu>
Date: 25/07/2014 22:29 (GMT+02:00)
To: Enterasys Customer Mailing List <***@listserv.unc.edu>
Subject: [enterasys] Re: [enterasys] Netsight SNMP error affecting MIB -SNMP load failure ‘Failure, “SNMP native library could not be loaded’ SNMP will not function correctly!”


I have seen this issue in the past if you try to use 64 bit java on any Netsight version less than 5.x.

Try installing 32 bit java and see if it fixes the issue.

-LC


On Fri, Jul 25, 2014 at 4:04 PM, Mamabolo, Pheko <***@siemens.com<mailto:***@siemens.com>> wrote:
Hello Everybuddy,

My Netsight Suite for the past 3 days gives me an error SNMP load failure ‘Failure, “SNMP native library could not be loaded’ SNMP will not function correctly!”

so I can’t view statistics, configuration and capabilities on Netsight Console this is after it has worked for the past 6 years with no such an error as this?

The first installed it 5 years ago and used on Microsoft XP and now for the past 1 year have been using on Windows 7,
My version is Netsight Suite ver. 4.0.0.93 with Java Version 7.65.

I have downgraded to older versions and did the same with the Java numerous times


I am able to receive alerts, information on my switches and AP’s but am not able to see active MIB
e.g. Link Operation, Last Change, Bandwidth, MAC Address, Counters on any of my devices at a go anymore not even when using MIB Tools or FlexVIEW .

All it contacts is the IP Address and Display Name.

[cid:***@apcprd06.prod.outlook.com]

[cid:***@apcprd06.prod.outlook.com]


OR NsJni:66 - Unable to load: C:\Users\netmanage\Application Data\NetSight\System\.bin\libeay32.dll
15:22:01,272 ERROR NsJni:66 - Unable to load: C:\Users\netmanage\Application Data\NetSight\System\.bin\nssnmp.dll
15:22:01,272 ERROR SnmpJNI:427 -
15:22:01,272 ERROR SnmpJNI:428 - *****************************************************
15:22:01,272 ERROR SnmpJNI:429 - ** Failure, SNMP native library could not be loaded.
15:22:01,272 ERROR SnmpJNI:430 - ** SNMP will not function correctly!
15:22:01,272 ERROR SnmpJNI:431 - *****************************************************
15:22:01,272 ERROR SnmpJNI:432 -
15:22:01,410 ERROR ClientContext:249 - The native SNMP layer failed to load.

I attempted numerous options and can‘t get to fix it.

I have confirmed Windows Firewall is not active in Domain Profile.
I checked all services including nssnmp.dll all seems intact I am not using snmp ver3 so configuring snmptrapd.conf is not the problem restarted services and the server no change, re-installed no change as you can see I do contact my devices


Any ideas?

With best regards,
Pheko Mamabolo
CIT–R AAE Network Analyst
Siemens (Proprietary) Limited
RC-ZA IT SD&CM N
300 Janadel Avenue
Midrand 1686, South Africa
Tel: [phone]<tel:%2B27%2011%20652-2938>
Mobile: [phone]<tel:%2B27%2082%20487-9822>
mailto:***@siemens.com








* --To unsubscribe from enterasys, send email to ***@unc.edu<mailto:***@unc.edu> with the body: unsubscribe enterasys ***@appstate.edu<mailto:***@appstate.edu>
--
Laramie Combs
Network Infrastructure and Control Systems
(office) 828-262-6945
(email) combslm - at - appstate.edu<http://appstate.edu>

* --To unsubscribe from enterasys, send email to ***@unc.edu<mailto:***@unc.edu> with the body: unsubscribe enterasys ***@siemens.com

---
To unsubscribe from enterasys, send email to ***@unc.edu with the body: unsubscribe enterasys gneu-***@gmane.org

[Yang, Charles]

Hello Pheko,
If you are using Netsight suite version 4.0.0.93, you have to load the latest Java version 6, not version 7. Also java version needs 32bit and not 64bit.

I know it is strange combination, which is how we get it to work in the Netsight that is pre version 5

Regards,


-cy


From: ***@email.appstate.edu [mailto:***@email.appstate.edu] On Behalf Of Laramie Combs
Sent: Friday, July 25, 2014 4:28 PM
To: Enterasys Customer Mailing List
Subject: [enterasys] Re: [enterasys] Netsight SNMP error affecting MIB -SNMP load failure ‘Failure, “SNMP native library could not be loaded’ SNMP will not function correctly!”

I have seen this issue in the past if you try to use 64 bit java on any Netsight version less than 5.x.

Try installing 32 bit java and see if it fixes the issue.

-LC

On Fri, Jul 25, 2014 at 4:04 PM, Mamabolo, Pheko <***@siemens.com<mailto:***@siemens.com>> wrote:
Hello Everybuddy,

My Netsight Suite for the past 3 days gives me an error SNMP load failure ‘Failure, “SNMP native library could not be loaded’ SNMP will not function correctly!”

so I can’t view statistics, configuration and capabilities on Netsight Console this is after it has worked for the past 6 years with no such an error as this?

The first installed it 5 years ago and used on Microsoft XP and now for the past 1 year have been using on Windows 7,
My version is Netsight Suite ver. 4.0.0.93 with Java Version 7.65.

I have downgraded to older versions and did the same with the Java numerous times


I am able to receive alerts, information on my switches and AP’s but am not able to see active MIB
e.g. Link Operation, Last Change, Bandwidth, MAC Address, Counters on any of my devices at a go anymore not even when using MIB Tools or FlexVIEW .

All it contacts is the IP Address and Display Name.

[cid:***@01CFA829.F192F7E0]

[cid:***@01CFA829.F192F7E0]


OR NsJni:66 - Unable to load: C:\Users\netmanage\Application Data\NetSight\System\.bin\libeay32.dll
15:22:01,272 ERROR NsJni:66 - Unable to load: C:\Users\netmanage\Application Data\NetSight\System\.bin\nssnmp.dll
15:22:01,272 ERROR SnmpJNI:427 -
15:22:01,272 ERROR SnmpJNI:428 - *****************************************************
15:22:01,272 ERROR SnmpJNI:429 - ** Failure, SNMP native library could not be loaded.
15:22:01,272 ERROR SnmpJNI:430 - ** SNMP will not function correctly!
15:22:01,272 ERROR SnmpJNI:431 - *****************************************************
15:22:01,272 ERROR SnmpJNI:432 -
15:22:01,410 ERROR ClientContext:249 - The native SNMP layer failed to load.

I attempted numerous options and can‘t get to fix it.

I have confirmed Windows Firewall is not active in Domain Profile.
I checked all services including nssnmp.dll all seems intact I am not using snmp ver3 so configuring snmptrapd.conf is not the problem restarted services and the server no change, re-installed no change as you can see I do contact my devices


Any ideas?

With best regards,
Pheko Mamabolo
CIT–R AAE Network Analyst
Siemens (Proprietary) Limited
RC-ZA IT SD&CM N
300 Janadel Avenue
Midrand 1686, South Africa
Tel: [phone]<tel:%2B27%2011%20652-2938>
Mobile: [phone]<tel:%2B27%2082%20487-9822>
mailto:***@siemens.com








* --To unsubscribe from enterasys, send email to ***@unc.edu<mailto:***@unc.edu> with the body: unsubscribe enterasys ***@appstate.edu<mailto:***@appstate.edu>
--
Laramie Combs
Network Infrastructure and Control Systems
(office) 828-262-6945
(email) combslm - at - appstate.edu<http://appstate.edu>

* --To unsubscribe from enterasys, send email to ***@unc.edu<mailto:***@unc.edu> with the body: unsubscribe enterasys ***@massport.com<mailto:***@massport.com>

---
To unsubscribe from enterasys, send email to ***@unc.edu with the body: unsubscribe enterasys gneu-***@gmane.org

[Mamabolo, Pheko]

I will give it a go in a couple of hours out tx -cj


Sent from Samsung Mobile



-------- Original message --------
From: "Yang, Charles" <***@massport.com>
Date: 25/07/2014 23:01 (GMT+02:00)
To: Enterasys Customer Mailing List <***@listserv.unc.edu>
Cc: "Yang, Charles" <***@massport.com>
Subject: [enterasys] RE: [enterasys] Re: [enterasys] Netsight SNMP error affecting MIB -SNMP load failure ‘Failure, “SNMP native library could not be loaded’ SNMP will not function correctly!”


Hello Pheko,
If you are using Netsight suite version 4.0.0.93, you have to load the latest Java version 6, not version 7. Also java version needs 32bit and not 64bit.

I know it is strange combination, which is how we get it to work in the Netsight that is pre version 5

Regards,


-cy


From: ***@email.appstate.edu [mailto:***@email.appstate.edu] On Behalf Of Laramie Combs
Sent: Friday, July 25, 2014 4:28 PM
To: Enterasys Customer Mailing List
Subject: [enterasys] Re: [enterasys] Netsight SNMP error affecting MIB -SNMP load failure ‘Failure, “SNMP native library could not be loaded’ SNMP will not function correctly!”

I have seen this issue in the past if you try to use 64 bit java on any Netsight version less than 5.x.

Try installing 32 bit java and see if it fixes the issue.

-LC

On Fri, Jul 25, 2014 at 4:04 PM, Mamabolo, Pheko <***@siemens.com<mailto:***@siemens.com>> wrote:
Hello Everybuddy,

My Netsight Suite for the past 3 days gives me an error SNMP load failure ‘Failure, “SNMP native library could not be loaded’ SNMP will not function correctly!”
…so I can’t view statistics, configuration and capabilities on Netsight Console this is after it has worked for the past 6 years with no such an error as this?

The first installed it 5 years ago and used on Microsoft XP and now for the past 1 year have been using on Windows 7,
My version is Netsight Suite ver. 4.0.0.93 with Java Version 7.65.

I have downgraded to older versions and did the same with the Java numerous times…

I am able to receive alerts, information on my switches and AP’s but am not able to see active MIB
e.g. Link Operation, Last Change, Bandwidth, MAC Address, Counters on any of my devices at a go anymore not even when using MIB Tools or FlexVIEW .

All it contacts is the IP Address and Display Name.

[cid:***@01CFA829.F192F7E0]

[cid:***@01CFA829.F192F7E0]


OR NsJni:66 - Unable to load: C:\Users\netmanage\Application Data\NetSight\System\.bin\libeay32.dll
15:22:01,272 ERROR NsJni:66 - Unable to load: C:\Users\netmanage\Application Data\NetSight\System\.bin\nssnmp.dll
15:22:01,272 ERROR SnmpJNI:427 -
15:22:01,272 ERROR SnmpJNI:428 - *****************************************************
15:22:01,272 ERROR SnmpJNI:429 - ** Failure, SNMP native library could not be loaded.
15:22:01,272 ERROR SnmpJNI:430 - ** SNMP will not function correctly!
15:22:01,272 ERROR SnmpJNI:431 - *****************************************************
15:22:01,272 ERROR SnmpJNI:432 -
15:22:01,410 ERROR ClientContext:249 - The native SNMP layer failed to load.

I attempted numerous options and can‘t get to fix it.

I have confirmed Windows Firewall is not active in Domain Profile.
I checked all services including nssnmp.dll all seems intact I am not using snmp ver3 so configuring snmptrapd.conf is not the problem restarted services and the server no change, re-installed no change as you can see I do contact my devices…

Any ideas?

With best regards,
Pheko Mamabolo
CIT–R AAE Network Analyst
Siemens (Proprietary) Limited
RC-ZA IT SD&CM N
300 Janadel Avenue
Midrand 1686, South Africa
Tel: [phone]<tel:%2B27%2011%20652-2938>
Mobile: [phone]<tel:%2B27%2082%20487-9822>
mailto:***@siemens.com








* --To unsubscribe from enterasys, send email to ***@unc.edu<mailto:***@unc.edu> with the body: unsubscribe enterasys ***@appstate.edu<mailto:***@appstate.edu>



--
Laramie Combs
Network Infrastructure and Control Systems
(office) 828-262-6945
(email) combslm - at - appstate.edu<http://appstate.edu>

* --To unsubscribe from enterasys, send email to ***@unc.edu<mailto:***@unc.edu> with the body: unsubscribe enterasys ***@massport.com<mailto:***@massport.com>

* --To unsubscribe from enterasys, send email to ***@unc.edu<mailto:***@unc.edu> with the body: unsubscribe enterasys ***@siemens.com

---
To unsubscribe from enterasys, send email to ***@unc.edu with the body: unsubscribe enterasys gneu-***@gmane.org

[Mamabolo, Pheko]

I tried this and did worked, thank you.

From: Yang, Charles [mailto:***@massport.com]
Sent: 25 July 2014 23:01
To: Enterasys Customer Mailing List
Cc: Yang, Charles
Subject: [enterasys] RE: [enterasys] Re: [enterasys] Netsight SNMP error affecting MIB -SNMP load failure ‘Failure, “SNMP native library could not be loaded’ SNMP will not function correctly!”

Hello Pheko,
If you are using Netsight suite version 4.0.0.93, you have to load the latest Java version 6, not version 7. Also java version needs 32bit and not 64bit.

I know it is strange combination, which is how we get it to work in the Netsight that is pre version 5

Regards,


-cy


From: ***@email.appstate.edu<mailto:***@email.appstate.edu> [mailto:***@email.appstate.edu] On Behalf Of Laramie Combs
Sent: Friday, July 25, 2014 4:28 PM
To: Enterasys Customer Mailing List
Subject: [enterasys] Re: [enterasys] Netsight SNMP error affecting MIB -SNMP load failure ‘Failure, “SNMP native library could not be loaded’ SNMP will not function correctly!”

I have seen this issue in the past if you try to use 64 bit java on any Netsight version less than 5.x.

Try installing 32 bit java and see if it fixes the issue.

-LC

On Fri, Jul 25, 2014 at 4:04 PM, Mamabolo, Pheko <***@siemens.com<mailto:***@siemens.com>> wrote:
Hello Everybuddy,

My Netsight Suite for the past 3 days gives me an error SNMP load failure ‘Failure, “SNMP native library could not be loaded’ SNMP will not function correctly!”

so I can’t view statistics, configuration and capabilities on Netsight Console this is after it has worked for the past 6 years with no such an error as this?

The first installed it 5 years ago and used on Microsoft XP and now for the past 1 year have been using on Windows 7,
My version is Netsight Suite ver. 4.0.0.93 with Java Version 7.65.

I have downgraded to older versions and did the same with the Java numerous times


I am able to receive alerts, information on my switches and AP’s but am not able to see active MIB
e.g. Link Operation, Last Change, Bandwidth, MAC Address, Counters on any of my devices at a go anymore not even when using MIB Tools or FlexVIEW .

All it contacts is the IP Address and Display Name.

[cid:***@01CFAA50.548A7760]

[cid:***@01CFAA50.548A7760]


OR NsJni:66 - Unable to load: C:\Users\netmanage\Application Data\NetSight\System\.bin\libeay32.dll
15:22:01,272 ERROR NsJni:66 - Unable to load: C:\Users\netmanage\Application Data\NetSight\System\.bin\nssnmp.dll
15:22:01,272 ERROR SnmpJNI:427 -
15:22:01,272 ERROR SnmpJNI:428 - *****************************************************
15:22:01,272 ERROR SnmpJNI:429 - ** Failure, SNMP native library could not be loaded.
15:22:01,272 ERROR SnmpJNI:430 - ** SNMP will not function correctly!
15:22:01,272 ERROR SnmpJNI:431 - *****************************************************
15:22:01,272 ERROR SnmpJNI:432 -
15:22:01,410 ERROR ClientContext:249 - The native SNMP layer failed to load.

I attempted numerous options and can‘t get to fix it.

I have confirmed Windows Firewall is not active in Domain Profile.
I checked all services including nssnmp.dll all seems intact I am not using snmp ver3 so configuring snmptrapd.conf is not the problem restarted services and the server no change, re-installed no change as you can see I do contact my devices


Any ideas?

With best regards,
Pheko Mamabolo
CIT–R AAE Network Analyst
Siemens (Proprietary) Limited
RC-ZA IT SD&CM N
300 Janadel Avenue
Midrand 1686, South Africa
Tel: [phone]<tel:%2B27%2011%20652-2938>
Mobile: [phone]<tel:%2B27%2082%20487-9822>
mailto:***@siemens.com








* --To unsubscribe from enterasys, send email to ***@unc.edu<mailto:***@unc.edu> with the body: unsubscribe enterasys ***@appstate.edu<mailto:***@appstate.edu>
--
Laramie Combs
Network Infrastructure and Control Systems
(office) 828-262-6945
(email) combslm - at - appstate.edu<http://appstate.edu>

* --To unsubscribe from enterasys, send email to ***@unc.edu<mailto:***@unc.edu> with the body: unsubscribe enterasys ***@massport.com<mailto:***@massport.com>

* --To unsubscribe from enterasys, send email to ***@unc.edu<mailto:***@unc.edu> with the body: unsubscribe enterasys ***@siemens.com<mailto:***@siemens.com>

---
To unsubscribe from enterasys, send email to ***@unc.edu with the body: unsubscribe enterasys gneu-***@gmane.org

[Mamabolo, Pheko]

@CY
@LC

Thank you, your suggestions worked.

From: Mamabolo, Pheko [mailto:***@siemens.com]
Sent: 28 July 2014 10:40
To: Enterasys Customer Mailing List
Cc: ***@massport.com
Subject: [enterasys] RE: [enterasys] Re: [enterasys] Netsight SNMP error affecting MIB -SNMP load failure ‘Failure, “SNMP native library could not be loaded’ SNMP will not function correctly!”

I tried this and did worked, thank you.

From: Yang, Charles [mailto:***@massport.com]
Sent: 25 July 2014 23:01
To: Enterasys Customer Mailing List
Cc: Yang, Charles
Subject: [enterasys] RE: [enterasys] Re: [enterasys] Netsight SNMP error affecting MIB -SNMP load failure ‘Failure, “SNMP native library could not be loaded’ SNMP will not function correctly!”

Hello Pheko,
If you are using Netsight suite version 4.0.0.93, you have to load the latest Java version 6, not version 7. Also java version needs 32bit and not 64bit.

I know it is strange combination, which is how we get it to work in the Netsight that is pre version 5

Regards,


-cy


From: ***@email.appstate.edu<mailto:***@email.appstate.edu> [mailto:***@email.appstate.edu] On Behalf Of Laramie Combs
Sent: Friday, July 25, 2014 4:28 PM
To: Enterasys Customer Mailing List
Subject: [enterasys] Re: [enterasys] Netsight SNMP error affecting MIB -SNMP load failure ‘Failure, “SNMP native library could not be loaded’ SNMP will not function correctly!”

I have seen this issue in the past if you try to use 64 bit java on any Netsight version less than 5.x.

Try installing 32 bit java and see if it fixes the issue.

-LC

On Fri, Jul 25, 2014 at 4:04 PM, Mamabolo, Pheko <***@siemens.com<mailto:***@siemens.com>> wrote:
Hello Everybuddy,

My Netsight Suite for the past 3 days gives me an error SNMP load failure ‘Failure, “SNMP native library could not be loaded’ SNMP will not function correctly!”

so I can’t view statistics, configuration and capabilities on Netsight Console this is after it has worked for the past 6 years with no such an error as this?

The first installed it 5 years ago and used on Microsoft XP and now for the past 1 year have been using on Windows 7,
My version is Netsight Suite ver. 4.0.0.93 with Java Version 7.65.

I have downgraded to older versions and did the same with the Java numerous times


I am able to receive alerts, information on my switches and AP’s but am not able to see active MIB
e.g. Link Operation, Last Change, Bandwidth, MAC Address, Counters on any of my devices at a go anymore not even when using MIB Tools or FlexVIEW .

All it contacts is the IP Address and Display Name.

[cid:***@01CFAA76.3C27FC30]

[cid:***@01CFAA76.3C27FC30]


OR NsJni:66 - Unable to load: C:\Users\netmanage\Application Data\NetSight\System\.bin\libeay32.dll
15:22:01,272 ERROR NsJni:66 - Unable to load: C:\Users\netmanage\Application Data\NetSight\System\.bin\nssnmp.dll
15:22:01,272 ERROR SnmpJNI:427 -
15:22:01,272 ERROR SnmpJNI:428 - *****************************************************
15:22:01,272 ERROR SnmpJNI:429 - ** Failure, SNMP native library could not be loaded.
15:22:01,272 ERROR SnmpJNI:430 - ** SNMP will not function correctly!
15:22:01,272 ERROR SnmpJNI:431 - *****************************************************
15:22:01,272 ERROR SnmpJNI:432 -
15:22:01,410 ERROR ClientContext:249 - The native SNMP layer failed to load.

I attempted numerous options and can‘t get to fix it.

I have confirmed Windows Firewall is not active in Domain Profile.
I checked all services including nssnmp.dll all seems intact I am not using snmp ver3 so configuring snmptrapd.conf is not the problem restarted services and the server no change, re-installed no change as you can see I do contact my devices


Any ideas?

With best regards,
Pheko Mamabolo
CIT–R AAE Network Analyst
Siemens (Proprietary) Limited
RC-ZA IT SD&CM N
300 Janadel Avenue
Midrand 1686, South Africa
Tel: [phone]<tel:%2B27%2011%20652-2938>
Mobile: [phone]<tel:%2B27%2082%20487-9822>
mailto:***@siemens.com








* --To unsubscribe from enterasys, send email to ***@unc.edu<mailto:***@unc.edu> with the body: unsubscribe enterasys ***@appstate.edu<mailto:***@appstate.edu>
--
Laramie Combs
Network Infrastructure and Control Systems
(office) 828-262-6945
(email) combslm - at - appstate.edu<http://appstate.edu>

* --To unsubscribe from enterasys, send email to ***@unc.edu<mailto:***@unc.edu> with the body: unsubscribe enterasys ***@massport.com<mailto:***@massport.com>

* --To unsubscribe from enterasys, send email to ***@unc.edu<mailto:***@unc.edu> with the body: unsubscribe enterasys ***@siemens.com<mailto:***@siemens.com>

* --To unsubscribe from enterasys, send email to ***@unc.edu<mailto:***@unc.edu> with the body: unsubscribe enterasys ***@siemens.com<mailto:***@siemens.com>

---
To unsubscribe from enterasys, send email to ***@unc.edu with the body: unsubscribe enterasys gneu-***@gmane.org